Black Widow .17 hmr

Started by herd118, October-27-10 07:10

Previous topic - Next topic

herd118

New member, and just got a BW .17hmr. Should I seek an upgraded cylinder pin? The current one is a real pain to remove - as well as a bit loose, and the new one looks a lot more secure.

coinchop

Herd118...

   If the pin works, don't send it in. I think the .17hmr's sent in for repair are replaced with 22mags. You might want to check that out first.

   And welcome to the forum..

ricart

If you like the caliber, fine.  If the gun is a new one and a  Black Widow, it should have the newer type pin, the one you pull down on to remove.  Make sure your doing it correctly.  Read the instructions.  You pull down out of the slot, turn the locking device at 180 degrees, then remove the pin.  Don't simply pull down and try to remove it.  Being a prior old pin type owner, and never reading instruction, I made that mistake.. Done properly, and the hammer quarter cocked, the pin should almost fall out..

ricart

OOPS!, I used the term "quarter cocked", don't know if that is proper usage..  It is the hammer safety catch designed in case the hammer is dropped while cocking. I see NAA calls it "half"cocked,

herd118

My 17 is an early one, with a low RS prefix S/N. If I remember correctly, NAA did not manufacture guns in .17 hmr past the October 2007 announcement of discontinuance, somewhat predating the new style cylinder release.

grayelky

You could sell it to me and get you a new Black Widow and not have the problems.....
Guns are a lot like parachutes:

"If you need one and don't have one, you'll probably never need one again"

cedarview kid

How hard to remove? If you're not really having problems with it, I would leave it alone. NAA can certainly fix it, if you're have problems, tho.

zippovarga

Make due with the early cylinder pin release. You're sitting on a "no longer in production" firearm. Just my opinion, for what it's worth.

herd118

Naa collector & Zippovarga, I believe you're right, it's not like I'll be carrying it. It may even attain some collectible value in the future.   Thanks for everyone's input!

grayelky

If I had it, it would not be for sale. It may not reach collector status and subsequent price, but it is something not many people have, making it unique. To me, that makes it desirable to a degree.
Guns are a lot like parachutes:

"If you need one and don't have one, you'll probably never need one again"