Main Menu

Grips makers for Ranger 2

Started by Jobrando, August-30-19 15:08

Previous topic - Next topic
Print
Go Down Pages1
User actions

Jobrando

August-30-19 15:08
Who is making grips for Ranger other than NAA. Vang does not. Anyone else?

Canoeal

#3
August-30-19 17:08
I don't know why most of the magnum grips wouldn't work on an RII. What am I missing?
"All it takes for evil to prevail, is for good men to do nothing."  Edmund Burke

grayelky

#4
August-30-19 19:08
The Vang's will likely Ned to be sanded/filed a little where the catch comes up over the top. The part of the Vang's that serve as a recoil whiled fit close enough to the frame the catch will not clear. Just takes a little time and just a little patience. Otherwise, any grip for a magnum frame will fit, as long as they don't fit the frame close like the Vang's do.
Guns are a lot like parachutes:

"If you need one and don't have one, you'll probably never need one again"

Canoeal

#5
August-31-19 08:08
Ok I get it now. The ones I made for my gun would fit...
"All it takes for evil to prevail, is for good men to do nothing."  Edmund Burke

Jobrando

#6
August-31-19 08:08
Quote from: grayelky on August-30-19 19:08
The Vang's will likely Ned to be sanded/filed a little where the catch comes up over the top. The part of the Vang's that serve as a recoil whiled fit close enough to the frame the catch will not clear. Just takes a little time and just a little patience. Otherwise, any grip for a magnum frame will fit, as long as they don't fit the frame close like the Vang's do.
Ive taken the vang mag grips off my pug and applied to ranger and its not even close. Much more than sanding needed.

OV-1D

#7
August-31-19 11:08
  Just gotta carve out for going over the shield , use a rasp file then smooth out with fine grit sand paper . Slowly but surely always checking for coverage , want to take off just enough no more no less .Good luck you can do it .
TO ARMS , TO ARMS the liberal socialists are coming . Load and prime your weapons . Don't shoot till you see their UN patches or the Obama bumper stickers , literally . And shoot any politician that says he wants to help you or us .

Jobrando

#8
August-31-19 13:08
Quote from: OV-1D on August-31-19 11:08
  Just gotta carve out for going over the shield , use a rasp file then smooth out with fine grit sand paper . Slowly but surely always checking for coverage , want to take off just enough no more no less .Good luck you can do it .
are u saying dig out around the shield deeper on both sides

OV-1D

#10
August-31-19 15:08 Last Edit: August-31-19 15:08 by OV-1D
Quote from: Jobrando on August-31-19 13:08
Quote from: OV-1D on August-31-19 11:08
  Just gotta carve out for going over the shield , use a rasp file then smooth out with fine grit sand paper . Slowly but surely always checking for coverage , want to take off just enough no more no less .Good luck you can do it .
are u saying dig out around the shield deeper on both sides





   On the grips . Is there any other place ? Myself I thing Cvang grips are bogus anyhow if you enlarge the grips that much you just might as well carry a snub 38 .
TO ARMS , TO ARMS the liberal socialists are coming . Load and prime your weapons . Don't shoot till you see their UN patches or the Obama bumper stickers , literally . And shoot any politician that says he wants to help you or us .

Jobrando

#11
August-31-19 15:08
Quote from: OV-1D on August-31-19 15:08
Quote from: Jobrando on August-31-19 13:08
Quote from: OV-1D on August-31-19 11:08
  Just gotta carve out for going over the shield , use a rasp file then smooth out with fine grit sand paper . Slowly but surely always checking for coverage , want to take off just enough no more no less .Good luck you can do it .
are u saying dig out around the shield deeper on both sides
Can you take a pic from above. I like my grips seamless as im sure most of us expect.




   On the grips . Is there any other place ?

Warthog

#12
August-31-19 16:08
I have CVaang grips on one of my Ranver 2's, a little off the back of the ears on the grips and mine works fi e. I used a k ife to make the adjustments.
"The world is a dangerous place to live, not because of the people who are evil, but because of the people who don't do anything about it."
-Albert Einstein

Jobrando

#13
September-01-19 05:09
Quote from: Warthog on August-31-19 16:08
I have CVaang grips on one of my Ranver 2's, a little off the back of the ears on the grips and mine works fi e. I used a k ife to make the adjustments.
be most helpful if someone posted a YouTube doing it. I bought a pair of vang competitor
Grips that said they would fit ranger but were far off. I sent back for adjustments but still
Not right. Sent back got refund. Thats why im reluctant to taking my dremal to it.

Canoeal

#14
September-01-19 09:09 Last Edit: September-01-19 20:09 by Canoeal
Quote from: Jobrando on September-01-19 05:09
Quote from: Warthog on August-31-19 16:08
I have CVaang grips on one of my Ranver 2's, a little off the back of the ears on the grips and mine works fi e. I used a k ife to make the adjustments.
be most helpful if someone posted a YouTube doing it. I bought a pair of vang competitor
Grips that said they would fit ranger but were far off. I sent back for adjustments but still
Not right. Sent back got refund. Thats why im reluctant to taking my dremal to it.

That might be hard for some to post...in reality...
"All it takes for evil to prevail, is for good men to do nothing."  Edmund Burke

Jobrando

#15
September-01-19 10:09
Quote from: Canoeal on September-01-19 09:09
Quote from: Jobrando on September-01-19 05:09
Quote from: Warthog on August-31-19 16:08
I have CVaang grips on one of my Ranver 2's, a little off the back of the ears on the grips and mine works fi e. I used a k ife to make the adjustments.
be most helpful if someone posted a YouTube doing it. I bought a pair of vang competitor
Grips that said they would fit ranger but were far off. I sent back for adjustments but still
Not right. Sent back got refund. Thats why im reluctant to taking my dremal to it.

That might be hard for some to post...
your right,,, oh well maybe Vang wiil leave California and start making.

OV-1D

#16
September-01-19 14:09
Quote from: Jobrando on September-01-19 05:09
Quote from: Warthog on August-31-19 16:08
I have CVaang grips on one of my Ranver 2's, a little off the back of the ears on the grips and mine works fi e. I used a k ife to make the adjustments.
be most helpful if someone posted a YouTube doing it. I bought a pair of vang competitor
Grips that said they would fit ranger but were far off. I sent back for adjustments but still
Not right. Sent back got refund. Thats why im reluctant to taking my dremal to it.





  A lot of guys have carved theirs just fine on here , maybe someone who has any will walk you thru it . :)
TO ARMS , TO ARMS the liberal socialists are coming . Load and prime your weapons . Don't shoot till you see their UN patches or the Obama bumper stickers , literally . And shoot any politician that says he wants to help you or us .

Jobrando

#17
September-01-19 15:09
Quote from: OV-1D on September-01-19 14:09
Quote from: Jobrando on September-01-19 05:09
Quote from: Warthog on August-31-19 16:08
I have CVaang grips on one of my Ranver 2's, a little off the back of the ears on the grips and mine works fi e. I used a k ife to make the adjustments.
be most helpful if someone posted a YouTube doing it. I bought a pair of vang competitor
Grips that said they would fit ranger but were far off. I sent back for adjustments but still
Not right. Sent back got refund. Thats why im reluctant to taking my dremal to it.





  A lot of guys have carved theirs just fine on here , maybe someone who has any will walk you thru it . :)
a pic with a pointer to area to carve out would build my confidence. Also a top down pic
Of one thats been done. Gaps are unacceptable to me.

Jobrando

#18
September-03-19 11:09
Just kept smashing like play dough and fits perfectly. No cutting.
Print
Go Up Pages1
User actions