Shop clean up, organizing, streamlining, optimizing... Round #3

Rick_Jorgenson · January-31-21 00:01

Another round of "going through" our "New/Old Stock"

According to our accountant, any stock laying around at the end of the inventory year costs us money

(math, figures, they're all beyond my paygrade)

This is a "reject" because it was molded to the wrong gun! The Holster is safe and serviceable.

It is molded to a "Magnum" 1 5/8" Barrel and the "fit is fine" with great retention.

The stitch line is for a different gun but the Holster was molded to the 1 5/8" Magnum. So it looks "odd"

Since it doesn't pass QC cosmetically but does function, I would rather give it to someone here that would be able to use it than toss it in the trash.

It is a Right Hand Carry Cross draw Holster. (Wear on your Left Hip)

Chestnut with gold stitching

The cost is $5.00 to cover shipping (PayPal [email protected])

It goes to the first response on the thread

BTW... The 1 5/8" Magnum is NOT included!

Uncle_Lee · January-31-21 04:01

Another beautiful "reject".
I'll pass.
Ma taught me to be fair.

Bj · January-31-21 06:01

If that is ranger stitching, could someone adjust the fit for a ranger?

Boisesteve · January-31-21 09:01

1 5/8" magnum?? That's my daily carry, and has been so for decades!
If not too late, I'LL TAKE IT.
Steve in Boise

Rick_Jorgenson · January-31-21 11:01

Quote from: Boisesteve on January-31-21 09:01
1 5/8" magnum?? That's my daily carry, and has been so for decades!
If not too late, I'LL TAKE IT.
Steve in Boise

It's all yours Boisesteve!

Send me your address

Quote from: uncle_lee on January-31-21 04:01
Another beautiful "reject".
I'll pass.
Ma taught me to be fair.

You are a gentleman Uncle_Lee

Quote from: Bj on January-31-21 06:01
If that is ranger stitching, could someone adjust the fit for a ranger?

Welllllll..... No guarantee that would work and, I don't believe it will work

But sometimes I'm wrong

This was done prior to me ever having access to the Ranger II. It's been around for quite a while.
After looking at the stitch line I have no idea what gun that might be for. (It doesn't match the Ranger stitch line we use)
But, I do know what it was molded with!

Boisesteve · January-31-21 15:01

Rick, this is very generous of you. THANK YOU!! ($ headed your way!)
PS Sorry about the delay replying to you; after an early NAA Forum view over breakfast, spouse and went hiking all day.
Be well! Steve in boise

Bj · January-31-21 19:01

Quote from: Bj on January-31-21 06:01
If that is ranger stitching, could someone adjust the fit for a ranger?

Thinking about it and seeing Rick's reply, it does seem like a bad idea. Kind of wish I had a 1 5/8" magnum at the time I first saw the offer.

This is very generous of Rick.

Wumbey Goomba · January-31-21 19:01

Give me some duct tape a paper clip and a q-tip,
I'll make it fit.

Canoeal · January-31-21 21:01

Yeah, I didn't think about my Wasp...

Rick_Jorgenson · February-01-21 10:02

Quote from: Wumbey Goomba on January-31-21 19:01
Give me some duct tape a paper clip and a q-tip,
I'll make it fit.

MacGyver of Leather Working! lol!!

Quote from: Bj on January-31-21 19:01
Quote from: Bj on January-31-21 06:01
If that is ranger stitching, could someone adjust the fit for a ranger?

Thinking about it and seeing Rick's reply, it does seem like a bad idea. Kind of wish I had a 1 5/8" magnum at the time I first saw the offer.

This is very generous of Rick.

There are more coming. Everyone here has helped me and I appreciate that.

These Holsters have been hanging out at the shop for too long. Only because they were cosmetically flawed or we changed the pattern to a new style.

When the accountant said to dispose of them to help the bottom line... I couldn't throw them away.

I figured someone could use them for "Work Holsters" or something. I'm happy to get the shipping covered!

Quote from: Canoeal on January-31-21 21:01
Yeah, I didn't think about my Wasp...

I have a couple of Pancake 1 5/8" one Black, two in Chestnut. One is yours if you want it Al

Canoeal · February-01-21 11:02

Chestnut it is...

pietro · February-01-21 15:02

.

Well done, Rick - a gentlemanly thing, indeed....

.

Rick_Jorgenson · February-01-21 15:02

Quote from: pietro on February-01-21 15:02
.

Well done, Rick - a gentlemanly thing, indeed....

.

Well, thank you! I've been called a lot of things lately, this is the nicest

I try to really accommodate everyone, especially those of you here on the Forum!

josp · February-03-21 04:02

Holding hope for post #4........maybe a cross draw for a magnum stubby?

Fingers crossed. Until then I'll use my paddle holster.

Rick_Jorgenson · February-04-21 09:02

Quote from: josp on February-03-21 04:02
Holding hope for post #4........maybe a cross draw for a magnum stubby?

Fingers crossed. Until then I'll use my paddle holster.

I'll look around for one and let you know

Uncle_Lee · February-04-21 13:02

While you are looking, see if you see a reject right hand SOB for a Mini Master.

heyjoe · February-04-21 16:02

ut oh....now you got special reject orders coming in...haha

Rick_Jorgenson · February-04-21 19:02

Quote from: Rick_Jorgenson on February-04-21 09:02
Quote from: josp on February-03-21 04:02
Holding hope for post #4........maybe a cross draw for a magnum stubby?

Fingers crossed. Until then I'll use my paddle holster.
I'll look around for one and let you know

I do have one that...
for some reason is 3/16" too short for the 1 5/8" magnum but... about 3/16" too long for the 1 1/8" Magnum
I would say that is a Reject X 2! lol!!!

It may have been molded for a Sidewinder but I tried that in it and I didn't like how it fit either!
Let me know if you want it josp, your first. If not, someone else might

$5.00

Rick_Jorgenson · February-04-21 19:02

Quote from: heyjoe on February-04-21 16:02
ut oh....now you got special reject orders coming in...haha

Now I just "Mess them up" on purpose! lol!!

josp · February-04-21 19:02

Looks fine to me! Let me know which payment you prefer.

Boisesteve · February-08-21 12:02

Yay Rick, and THANK YOU again. It has arrived!
I've 'won' three times in my life. This holster is the most recent.
Around 20 years ago I went to a conference in my new specialty that was sponsored by the equipment manufacturer Pentax. And I won the door prize, a little Pentax camera.
The only other time I've won, the 'prize' changed my sorry life for the better, and that was 30 years ago when I met my wife.
Life is good.

Uncle_Lee · February-08-21 13:02

That is sooooooo nice.

RogueTS1 · February-08-21 13:02

Very much so. Ours is supposedly sitting in the mailbox. We will see when we get home.

Terry treefish · February-08-21 14:02

Congratulations Steve, you are truly a winner. Beautiful.

Rick_Jorgenson · February-09-21 00:02

Quote from: Boisesteve on February-08-21 12:02
Yay Rick, and THANK YOU again. It has arrived!
I've 'won' three times in my life. This holster is the most recent.
Around 20 years ago I went to a conference in my new specialty that was sponsored by the equipment manufacturer Pentax. And I won the door prize, a little Pentax camera.
The only other time I've won, the 'prize' changed my sorry life for the better, and that was 30 years ago when I met my wife.
Life is good.

You're living it up now! The wife, the camera, and now the Holster!
I'm glad you like it!

Quote from: RogueTS1 on February-08-21 13:02
Very much so. Ours is supposedly sitting in the mailbox. We will see when we get home.

I received a report that the Princess has laid claim to it!

RogueTS1 · February-09-21 15:02

QuoteI received a report that the Princess has laid claim to it!

Luckily for me, you sent two so I was able to put one to work for myself:

OV-1D · February-10-21 08:02

I tried doing that Rick but I put things in boxes kept them in a circle till they came back to me , in other words I still have everything .

I what one calls a "HORDER FOR PUNISHMENT" .

Oh by the way ,,,,,, lovin it . I think I even kept the dust .Ha .

josp · February-18-21 17:02

Got the "Misfit" today. All I can say is wow!

And another nice surprise in the little bag, a business card holder! Extremely generous of you Rick!

Thanks again!,

Rick_Jorgenson · February-20-21 08:02

Quote from: OV-1D on February-10-21 08:02
I tried doing that Rick but I put things in boxes kept them in a circle till they came back to me , in other words I still have everything . I what one calls a "HORDER FOR PUNISHMENT" . Oh by the way ,,,,,, lovin it . I think I even kept the dust .Ha .

You have a box marked "Old Dust" lol!! I know the feeling! How do we acquire so much "stuff"?

Rick_Jorgenson · February-20-21 08:02

Quote from: josp on February-18-21 17:02
Got the "Misfit" today. All I can say is wow!

And another nice surprise in the little bag, a business card holder! Extremely generous of you Rick!

Thanks again!,

You are welcome, thanks for posting the photo. That Holster looks great in the photo!