Hardly Multiplying

barrytheprof · October-08-21 23:10

At my rate it's more like addition.

I picked up a 1 5/8 mini. I wanted something in between the 1 1/8 and the BW (2").

So here's my collection, dressed and undressed, and of course the reloads.

I expect to put another Viridian on the BW.

The 1 5/8 is now my EDC.

vjp · October-09-21 04:10

Nice collection, love those cylinder covers. I just ordered a Viridian from the NAA website, since you have it on two out of three I?m assuming they perform well and are a nice addition.

OLD and GRUMPY · October-09-21 05:10

I like the reloads. Just drop in pocket no belt. Could we get pics of the bottom and empty? Might make one.

Uncle_Lee · October-09-21 06:10

The virus strikes again.
Nice set up.

barrytheprof · October-09-21 08:10

Quote from: OLD and GRUMPY on October-09-21 05:10
I like the reloads. Just drop in pocket no belt. Could we get pics of the bottom and empty? Might make one.

Here's the pattern.

Rick_Jorgenson · October-09-21 08:10

Now you could add a Pug to that lineup!

Then, a Mini Master.... you know, just for fun!

Nice job on the carry rigs! The spare Cylinder carrier is a great idea and excellent design

barrytheprof · October-09-21 08:10

Thanks Rick

OV-1D · October-09-21 13:10

Theres always JUST one more I would like to have , thats my motto at least . Fine looking setups .

OLD and GRUMPY · October-09-21 16:10

Thanks for the pattern . Is that mag? I am in the middle of a move - 0ne of the best of all time (Exodus) Paul Numan. Back latter.

barrytheprof · October-09-21 18:10

Great movie!
Yes they're all mag. If you have lr or short, do what I did, wrap a piece of leather around the cylinder and mark the leather. Stand the cylinder up above and below the rectangle drawn on the leather and trace the two covers. Stir occasionally.

By the way I redid the newest holster. It was about an hour old when I took the shot. It's the bottom one on the original shot, holding the 1 1/8 minimag. I used the 1 5/8 holster as a guide, figuring I'd simply cut a 1/2" off the bottom, then I forgot to trim the 1/2" off the bottom. I also needed to tighten it up around the cylinder.

Now the holster for the 1 1/8 is 1/2" shorter than the other one. And the fit around the cylinder is just right.

In the past I worked with heavier smooth finished leather. Working with light suede is interesting. You can actually move a seam and the old holes disappear into the nap.

Anyway, here's a new shot: