Crooked firing pin/hammer

[Dustin0330]

Has anyone had issues with light primer strikes due to a crooked firing pin/hammer? I started to have ftf after about 15 rounds on the replacement mini that I received and after inspecting it I noticed the hammer was crooked. Will NAA pay the return shipping for warranty work on a mini that was replaced less than 2 months ago?

[engtee]

The hammer is supposed to be slightly skewed toward the left side, according to NAA.

[TwoGunJayne]

I've had a miss-timed cylinder mar the hammer nose before. It wasn't the mainspring, but a marred hammer from hitting the cylinder. There wasn't enough meat left to crimp the rimfire at that point.

Anyway...

If you've had the mini less than 2 months, they're going to make it right. Give NAA customer service a call. It'll be all good. Trust me. They've never let me down.

By the way, NAA minis have the firing pin and hammer integrated into one unit, therefore the safety notches. Never carry "hammer down on an live chamber." Learn about the safety notches.