Asking for Owner's Opinions on the Holster Grip

[pete_on_the_coast]

I live in a small town and haven't seen any NAA holster grip models in our local stores for a long time.  Several years ago I had one in hand and remember being impressed by the grip/design/concealability.  Now, I'm considering buying one, based on (1) I want a revolver with maximum ease of carry characteristics, (2) I don't have confidence in my ability to handle the smaller fixed grips and (3), the BW, which I would love to have, seems no easier to carry/conceal than my Kel Tec .32.

I would appreciate opinions from those who have owned any version of this design - real life carry satisfaction, shooting characteristics, durability of the holster grip, any other issues you've experienced etc.

Thanks in advance, guys.

[Javier C.]

My first NAA .22 magnum came with the holster/grip already installed when I bought it.  It is a nice way to get good grasp on the piece because it is larger and longer than the normal bird's head grip, and even some larger optional grips from NAA.  One thing you may encounter is the slight pivotal movement when the  grip is extended for use.  It doesn't detract from the gun's ability to shoot, but it may move ever so slightly in your hand during recoil.

Remember to push BOTH of the buttons on the grip simultaneously when collapsing it to the holster position.  The belt clip can be switched from one side to the other, but don't lose any small parts while doing the swap, or you'll have to get replacements.  Also be advised that if you have the holster grip installed on your piece, that you CANNOT use the NAA Mini belt buckle.  That retention device only works with the standard bird's head grips.

I have found that for the .22 magnums revolvers, the holster grip is very useful for ultra concealed carry, such as inside a vest pocket, or jacket pocket.  I believe the factory offers a holster grip for both calibers of .22 which they offer, and there IS a size difference between the two.  Best of luck with your choice.

[pete_on_the_coast]

Thanks for your input, Javier.  If I buy an NAA with a holster grip, I would probably go with what appears to be the factory installed models, which are LR versions, with two barrel lengths, 1 and 1/8 and 1 and 5/8.  My sense is that unless you have a 2" barrel, there's little advantage to the .22 mag version.

[Javier C.]

Best of luck with that.  It seems to me that if the .22LR rifle would work with the .22 Magnums, then why would NAA make two separate holster grips, at the same price for each?  The folding grip for the Magnums is a bit longer, perhaps to make up for the longer cylinder.  One does not out price the other, so  you choose.

[ikoiko]

Magnum frames are larger than LR frames, so fitment is likely different .

[Kentucky Kevin]

I love God, my family, people, and knowledge, and I really really like floppy wobblers, they present quickly and allow better aiming

[bbgun]

Several years ago I was working under a golf cart adjusting something and, when I went back in the house, I reached into my pocket.  Much to my  surprise my 22lr was cocked!!!!!  I was horrified.  Scared the hell out of me.  My movements on the ground had cocked it.   Well, that was the key for me to put holster grips  on all my NAAs -- I carry several of them,switching off.  At least if it gets cocked the trigger can't be pulled.  And I feel a whole lot safer with the wobblers.

[bbgun]

The best holster grip of  all  is the original one for the 22lr. This is the one with the logo on one side and the part that comes up around the barrel.  Just cut that part off til it looks like the newer one for the mag.  It only has one button to release it.  And it ain't got no wiggle or wobble to it.  Anybody want to sell one?

[TXpug]

I have the longer barrel mini combo that came with the folding holster grip. I really like it, I do wish that it had the shorter barrel to make the package a little smaller. With practice you can quickly pull it out and flip it open ready to shoot. I'm thinking about buying another holster grip to put on my pug.

[pete_on_the_coast]

As the OP, I appreciate the feedback from everyone, especially BB about the golf cart incident!

I am a bit surprised that more owners did not join in with their experience - perhaps as a percentage of NAA firearms the holster grip is just not that common.

[OV-1D]

Several years ago I was working under a golf cart adjusting something and, when I went back in the house, I reached into my pocket.  Much to my  surprise my 22lr was cocked!!!!!  I was horrified.  Scared the heck out of me.  My movements on the ground had cocked it.   Well, that was the key for me to put holster grips  on all my NAAs -- I carry several of them,switching off.  At least if it gets cocked the trigger can't be pulled.  And I feel a whole lot safer with the wobblers.

  Can't help with the holster issue haven't any but that story of yours bbgun sure would have put a cold sweat on my brow , wow . Everyone be careful , please . 

[Javier C.]

Just for your info, I have swapped that holster/grip onto another .22 magnum mini (with a longer 1-5/8" bbl) without any difficulty nor need to adjust anything.  No gunsmith knowledge necessary to perform that swap.  Might be a good idea to have TWO holster grips, just in case you buy a second Mini, or accidently lose the spring for the detent buttons.

[RogueTS1]

Do not have one but have handled them at shows etc. I do not care for them. They are too unstable feeling in my opinion. The only thing that goes on my Minis is the Secret Service grips.

[cfsharry]

I have to agree with Rogue. 
I am from that era when guns were considered more tools than toys, (though there has never been anything wrong with the fun aspect of guns).  We expected our tools to work properly from the factory and grips that were anything but rock solid would not have been tolerated. 
The two most important things regarding a handgun's ability to deliver it's maximum inherent accuracy is a consistent grip and a good trigger.  To my mind, without both, a shootist will never realize the accuracy potential of which he/she is capable.

[grayelky]

I just don't care for them. I also don't like pocket clips on my pocket knives. A number of folks obviously don't share my sentiment, as NAA still offers them. It must be financially profitable, or they would likely be a thing of the past.

[Taxi]

What about clips on pens, surely you think they are a good idea?

[cfsharry]

Only the ones with black ink.  All other colors, clipless.

[Kevin55]

I have the original holster grip on my 22lr 1-1/8 barrel.   This grip or the Cvang grip are the only way to go with the small 22lr frame.

If you look at my posts, I created an image that projects the size increase when adding a holster grip.  The tiny 22lr seems. Much larger, but the overall dimensions dont change much and the revolver profile is hidden.

The grip does scratch the frame.  Some Scotch tape, no wiggle, no scratch.

[RogueTS1]

I like clips on both my folder knives and my pens. The ones on my pens are much more handier but I still like them on the knives none the less.

[Richard58]

I have two 22 mags one with and one regular grip. I use them for different clothes at different times for what best at that moment. The folder is slower to get into action but once open and in hand it's better for hand fitment IMHO.

[grayelky]

I have practiced a little with the holster griped mini. It is pretty quick to deploy with just a little practice. Once my fingers get it just a little way out of the front pocket, a flick of the wrist and catching the barrel on the pocket and it is fully deployed and ready to use.

Anyone who has a need for a pocket clip for a Kershaw Blur, drop me a note. I have a few I am not using. I do like clips on my writing pens. With that thought in mind, I won't buy a shirt w/o a pocket. No, I don't wear t-shirts away from the house.