Guardian 380 Trigger Bar

[nakagawa]

Hey there gentlemen,  

   

   I noticed after firing my Guardian 380 at the range the other day and cleaning the gun after that the trigger bar (the thin metal bar that is underneath the plastic grips) slightly works loose and does not remain completely flush with the frame. I took a further look and noticed that the Bronze colored screw/pin that secures the trigger bar was loose as well and that simple tightening of the screw solved the problem of the transfer bar being loose.

   

   My question to all of you, have any of you ever noticed this? And if so, did you do anything (I.e. blue loctite on the screw) to keep this from happening?

   

   I have had no trigger failures even if the bar was loose as the plastic grip holds everything in place before any part can completely work loose, however I will admit that parts working loose from firing does bother me a bit.  

   

   Thanks in advance.