Quote from: TwoGunJayne on February-07-14 20:02

Quote from: Mitchg95 on February-07-14 17:02
That would be cool to cast my own .22 bullets

I am told of a way to turn old rimfire brass into swaged lead core projectiles for .223/5.56 (depending on specs.)

It isn't casting, it's just running a lead wire into a swage die. There are kits you can get, and a ROI time.

Hi Jayne, there is a guy that goes by "PT Sniper". He swagges lots of calibers of brass shells into brass bullets. He does a lot of .223 shooting too. He also makes the Dies and stuff for you to buy. I'm thinking about getting some of his dies.

WOW! Nice. I like that. 

Hi Mitchg95, I think you can use .24 lead round balls in your Black Powder NAA. I was going to buy a bag of them and see if they work. They are only .02 bigger.

I love my Hi-Points. Great guns. Plus a No BS lifetime warranty on them. All the carbines are perfect. The 380 and 9mm fit me the best. The .45acp and .40S&W are a little big for me. I like shooting my .45acp. I always hit what I aim at. 

Mitchg95, now ya need a mold to make some of them .22 lead bullets. 

BTW, I also have a Tap-O-Cap. Great thing to have! 

Heh! TwoGunJayne, I got .177 and .22 BBs and Pellet guns covered here! 

Hi Mitchg95, there were no wooden grips in the three lots/auctions that I bought. There was one auction with very nice grips that went $165 for the whole lot. I could not bid on that lot!!! Too rich for my blood.

Hi Jayne, no...just bought the NAA parts gun for the .22lr cylinder. There were everything but the frame. They destroy the frames.

Also, I have a broken Black Powder NAA pistol that needs a new trigger. Got that fix. 

Anyone need any parts, give me a shout.

It sucks to be me...all I have are some .22 shot shells. 

P.S. no .22 ammo around me here in MO.

on gunbroker.com.
Hi Guys, I see on some threads that people wanted to know if the barrels on the NAA 5-shot revolvers, .22LR or .22mag ones were pressed in or screwed in.
Well, on gunbroker I bought one parts gun and the 1 and 5/8" barrel was in the auction. This barrel has threads on it. So, it's a screw in barrel.
Now, I don't know which way this barrel unscrews...yet. But, I will find out.

It's 5 degree here in Portageville, MO. Too darn cold for me! Brrrrrrrrrr!!!!!
Staying inside and watching Dexter on Netflix. 

I don't mind those yellow and black ones.
I would like the cylinder to be all black. 

OV-1D, those are all going to look very nice. 
Keep us in the loop on this!!!!

I like your set up on the mounting hardware. Very neat idea there! 

PM sent to grayelky. 

My Dad has a Charter Arms .38spl. He seems to like it. He doesn't shoot it much(maybe 50rds in a year).
I'll have to go over to his house and shoot it one of these days. 

I'm in LOVE!!!! 
Do they make this gun in .357mag?

That Bayonet looks NEAT! 

Hi grayelky, I would like to trade some instead of selling.
Do you have anything to trade?

Thanks grayelky! 

Mr_22, I'm loving that Zombie one! Yeah! 

Quote from: Goatpacker on November-22-13 09:11
I believe the muzzles start off square!!! I don't know but I keep getting this image in my mind of a guy sitting in front of a grinder next to a box full of Minis randomly rounding off the muzzle while holding a sandwich in his left hand!!! I just wanted to bring my observation to their attention thinking they may want to see if this is something that may be an easy fix!!! Maybe it did, who knows!!!

Heh! Goatpacker, I was thinking the same thing. 

I'm no help here but, I do love that trigger. 

Kimmy won't let me eat any beans...I fart too much. 

Heh! Heh! 

I likey!!!

Quote from: MR_22 on November-19-13 13:11

Quote from: MadDogStafford on November-19-13 08:11
I saw one Hi-Point .45acp pistol on gunbroker at $600...What the heck? 

Sold or listed? There's a big difference.

Listed...I'll tell ya, if this guns sells for that price...I'm going to list mine up for $600! Heh!

Well, seems that Dixie doesn't have them.
I see them on NAA. I'll get some there as soon as I get some greens! 
Good jokes there! Heh! 
I remember when I got my 1st Black Powder Gun, it was a Brasser 1858 Remmy .44cal. Bought it used on gunbroker. I didn't get any paper work with this gun. I had to look up on the computer to SEE how to take apart and put back together. It said to put a little grease on my nipples...WHAT?   

Thanks Guys for helping me out!!! 

Quote from: ephraim on August-16-13 10:08
We hear a lot of discussion about the minimum caliber that is useful for defense purposes. I think it depends on the circumstances.
I read a story of a young woman and her boyfriend who were hiking in the woods and encountered a grizzly bear. The grizzly charged them. She pulled out her 25 auto,  looked at the bear, then looked at her boyfriend, shot her boyfriend in the kneecap, and took leg bail. Quick thinking on her part, and in this case a '25' was enough.

OMG!!! Heh! Heh!

When you say NAA Mini...are you talking about the .22shorts or the .22lr or what?

Hi Guys, I got a NAA C&B(Black Powder) .22 coming in. It's missing the nipples. I want to buy these or trade something for the nipples. Anyone have some? I need 5 of them.

Quote from: Hardtackwon on November-18-13 14:11
I was at the range today, wife picking up brass, me gropeing her as she bent over, thought my mini was going to get some action , maybe later

Heh! I do that gropeing with Kimmy all the time. Sometimes I get slapped. 

Quote from: MR_22 on October-29-13 21:10

Quote from: G50AE on October-29-13 21:10
Do they make one in 50AE?

Why yes, yes they do! And as a bonus feature, it also comes with a plaster cast accessory, but it's recommend that you have a friend set your wrist for you and apply the plaster, rather than doing it by yourself. It always pays to have a shooting buddy!

Heh! Heh! Good one! 

I saw one Hi-Point .45acp pistol on gunbroker at $600...What the heck? 

Great photo there!