It was my understanding in the eBay listing, that when this batch was gone, no more will be made. 

Ambidextrous, as in able to put clip on either side? No.
These were 39.99.   

I carried it port side to see how easy it would be to draw if my right was disabled.  Wasn't bad.  Just turned palm out, and grabbed the grip. 

Took it out and put a few cylinders of CCI +V through it. 
Couldn't tell the clip was even there when shooting it. 
No pain, no scrape, no pinch.   Nothing. 
  Works for me

Not yet, but I did grip it tight and used my left hand to try wiggle and try to push and pull it out of my right hand.   

Just got these today.  Fit is good.  Finish is meh.   Need finish sanded, which I will do.  Screw is a hair long, but I can trim it.   The grips come up and cover back of cylinder, making draw easier.  Clip is smooth.  No sharp or rough edges.  Overall like them.  Might add a bit of grip tape in places, but I like them

I just took possession of a Black Widow yesterday.  My third mini.   The BW is amazing little gem.   
It's in my pocket as I type, but I do think I will get a holster grip for it, to have some flexibility in carry modes.  Kinda hard to hide in a shirt pocket as is.

I absolutely love mine on my LR.  Great picture there BTW. Seeing that makes me want to get better photos of mine.

I sometimes use it as a BUG, and when i do this is how i carry it.  Nice to see it isn't anymore noticeable with the grips on it this way.   

I also have the folding grip, but I found that I can present the gun quicker from a pocket with these grips than I can with the folder. 

Didn't think this day would ever come!  Love them!  Small amount of forward to back movement, but i can tighten that up. 

Quote from: uncle_lee on January-24-15 06:01

Quote from: Boom on January-23-15 18:01
Thanks, but i went a different route.  Got a set of Cvang grips on the way for my 22lr.    Can't wait!

I think you will be very pleased with the grips.
Please post a picture of them when you get them mounted.

I will!  From email conversation, looks like a three week wait.   

Thanks, but i went a different route.  Got a set of Cvang grips on the way for my 22lr.    Can't wait!

Been a while since I ordered last.  What is shipping costs to order grips now? 

Exactly what I needed to know.  Thank you.

Also got a reply from NAA.  They are replacing the grip no problem.

Happy happy happy

I know that.  I want to know if the external dimensions of the oversize grips are same or similar to those on Black Widow.   I know they are for different frames.   

Quote from: Paducah Michael on November-16-14 20:11
Oh - a fellow Traveling Man?

f W t E a E t W a

And Thanks!

I've grown quite fond of RIA.    Here is my GI FS

Yes, thank you.   Aware of frame differences.    If i had my Druthers, i'd have a set of the Cvang grips on it, but i can't seem to find them for 22lr versions. 

On a side note, are the oversize wood grips for the 22lr versions the same size as Black Widow grips?

It did come with the holster grip pre installed.  It is the same grip though, isn't it?  As the one sold separately?
Sorry for any confusion

Well, I can't see shipping the gun back since the holster grip is available as an add on and user replaceable.  The grip itself maybe, but not the whole gun.  Either way, I can't use it til I get new grips.

Not sure how this happened at all.   Was shooting Armscor HV 22lr today.  Nothing hot.  Third shot, the frame flipped up higher than normal.  When i looked at it, i saw this.   This is my second Mini with the HG.   First one has hundreds of rds without breaking.   This one is two weeks old.   I emailed NAA.  I hope they replace this, as it is almost new!

Thanks!   That's perfect!

Is there a thread somewhere that i am missing with pics?    I searched, but did not find one.      Would like to see some 22lr models with boot grips or the oversize rosewood grips, if anyone has any. 

Nevada

Pro gun

Open carry legal.
Shall issue
No duty to retreat
In vehicle can have handgun with round in chamber and hidden, as long as it isn't on you(unless you have ccw)
long gun cannot have round in chamber
CCW process:  Take CCW class from approved instructor, qualify at range with ANY gun, pay fee, get fingerprints and BG check, issued permit.  Once permitted you can carry ANY gun you own.   Any revolver or semi.   Doesn't matter. 
No gun lists, no mag limits.

Cannot carry on school property, hospitals, Court house, or Costco.   Everywhere else is good!

That is some leftover traction grips material I had from my XDs.  Cut it to fit, and it works well to help hold on.   

The postman delivered my Gerber Multi tool case today.   Pretty pleased with it.  Mini almost completely disappears in it.   Draws easy. 
Happy happy happy!

Well, i thought my accuracy was acceptable at first.   At 21 ft. i could keep them all on a piece of printer paper.    I did a little work on the crown as detailed in the link, and accuracy got better.   Might pick up some lapping compound, as i used a mix of Brasso and jewelers rouge.    Thanks for that link! 

multi tool pouch

Quote from: Goatpacker on March-31-14 20:03
If it is mostly hidden then why worry about what it looks like and get something that "functions the way it should like a Holster?

As a multi tool pouch it would be mostly hidden, and if i reach up to a top shelf somewhere i won't have to worry about exposing it. Whereas, a regular  holster would be obvious if my shirt came up .    I have my reasons why i want this option

Awesome info! 

QuoteHave you searched the forum?

First thing i did, and first thing in the OP. 

I want nylon instead of leather, but thanks for that link.

The pouch will be mostly hidden by clothing.   Don't foresee that as an issue.

Standard grip.     Looking specifically at multi tool/knife pouches.   I already carry a phone   Don't want to make it look like I am carrying two

Searching didn't come up with much.    What size multi tool pouch will the 22lr fit  in?   I prefer this over the cellphone pouch for a few reasons.