MM w/ scope accuracy

Maccab · August-26-13 09:08

If they aren't actually holes, the vents... You could try cutting the mounts slat things, and fitting one either side then screwing to the mount.

Kentucky Kevin · August-26-13 09:08

The overall length is 8 3/4" I have a bearcat and a single six, niether of which has a mag cylinder, which would be nice in a SHTF( s it hit the fan) situation. I'll see if I can locate the mounts info from Amazon where I bought it

OV-1D · August-26-13 09:08

It would be allot easier to fit a Ruger Mark 1 or 2 with a scope and shoot must better and hold . Myself I don't get it .........trying to fit a mini............ WHY ? The barrel lengths on minis won't shoot accurately as far as the scopes reach out , so why ? Don't mess up a good close up gun by carving on them just buy a gun more suitable .

Maccab · August-26-13 09:08

Aren't mini masters quite big, compared to mini?

Maccab · August-26-13 09:08

4" barrel, hmmm... Thought they looked longer, more like 6" still with one of those short magnified scopes might be cool like a mini rifle thing if you sat down and lent against something pop it on your knee.

I · August-26-13 10:08

Quote from: Maccab on August-26-13 09:08
4" barrel, hmmm... Thought they looked longer, more like 6" still with one of those short magnified scopes might be cool like a mini rifle thing if you sat down and lent against something pop it on your knee.

Sadly, the only 6" available from NAA is the hogleg. I'd be good for a 6" mini master, but I'm sure it's been said before.

NAA needs more long barrels!

Kentucky Kevin · August-26-13 10:08

Be prepared!!! Prayfor the best prepare for the worst. Chance favors a prepared mind. The ability to harvest with head shots fillls a potential need.

I · August-26-13 12:08

Quote from: OV-1D on August-26-13 09:08
It would be allot easier to fit a Ruger Mark 1 or 2 with a scope and shoot must better and hold . Myself I don't get it .........trying to fit a mini............ WHY ? The barrel lengths on minis won't shoot accurately as far as the scopes reach out , so why ? Don't mess up a good close up gun by carving on them just buy a gun more suitable .

You have a great point there, but the NAA mini master is so much lighter than other in-class rim fires... The takedown ruger 10/22, the Henry AR7, the Ruger M1, 2, or 3... Even the "child" class Crickett rifles.

I think a scope set with mounts from NAA would be a deal maker for a lot of people.

cfsharry · August-26-13 14:08

I,
If you ran a business that had all it could do to keep up with demand for your products, would you divert resources, capital or labor, to develope a product with, at best, limited niche appeal? That is what you are asking of NAA.
If, however, you believe there is sufficient market for the product you would like to see NAA introduce, you may have found the ideal opportunity to start your own business.

I · August-26-13 15:08

With the greatest respect, sir, I'd like to repeat an unsubstantiated "gun shop statement" that I heard today.

Gun shop guys can be mostly full of crap, but today some young "gun shop guy" said that Keltec diverted resources to open a new plant and that it put them even further behind.

Firstly, this was the first I've heard of this, so I was immediately suspicious.

Secondly, I'm fully aware that NAA is blasting out as much as they can in the face of an insatiable market.

I'm reminded of Duncan Yoyos that peaked in 1969. There was a craze, a fad. Duncan was paying air freight for wood for a product selling less than a dollar (before scalping.) this was in 1969... Summer of Love. As the craze tapered off, Duncan began throwing very large marketing dollars to keep the craze going. Both Duncan and Whamo nearly went out of business, not due to a lack of business, but an excess. Boom and bust kills industries. I urge extreme caution on one hand, but can't wait for more new stuff on the other.

Sir.

I · August-26-13 15:08

Ps: if NAA would like free prototype testing with chrono and ammo reports with ballistic gel, call on me for free. New model prototypes? Sure. I'll even sign an NDA. ... For resources!

If NAA does what I expect, they will just churn and churn until the bubble bursts. Remember the dotcom bubble? Housing bubble? Bank bad-loan bailout bubble?

Guns are gold and when the Great Obama Golden Gun bubble bursts, I fear for any newcomers in the industry, or any major player that over invested.

Remember, very recently even Ruger stopped accepting orders to catch up.

I'm 100% that Sandy wont drop the ball. I know he's got a ton of ideas when the time is right.

I still want the new products, though!

you know what I mean.

Kentucky Kevin · August-28-13 15:08

Took the MM to the range today, and couldn't hit it with it, so I shoot golfballs with the Charger and Minis with flppy wobblers. Date day with my wife and to hot to stay and play long, save sighting in for another time.

Maccab · September-01-13 14:09

How about,

http://www.jackweigand.com/Ruger-Redhawk-Scope-Mounts-No-Drill.html

maybe modify it "uses the iron sight attachments" or knock up something along those lines.

Or,

http://www.midwayusa.com/product/384303/weaver-mount-scope-base-ruger-redhawk-308s-silver

this.

Perhaps these,

http://www.shopping.com/Millett-Millett-Hunting-Ruger-Scope-Rings-M77-Super-Redhawk-Rings-1in-High-Smooth/info

the clasps look a bit more suited than those for normal dovetails.

Kentucky Kevin · September-03-13 21:09

Range time again, got the MM grouping to golf ball size at 20 yds pretty quickly today, and the wife hitting golf balls with the Rossi TD pump at the same distance. Hope to play some more soon.

Kentucky Kevin · September-07-13 09:09

Group size blew up to softball size, not enough sleep and to much coffee. Decided to just plinkgolf balls ay 5-20 feet with the minis, 50% accuracy. 3 seconds from concealed to first shot from holster grip, hands at side. The great thing about the holster grip is that it can be deployed and held in hand in pocket, when you see the storm comming, I'll time that next time out.