Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - wd345

#1
I still have the sidewinder for sale. $350 for a local sale. Huntsville al
#2
Breaktop and 22short sold
#3
sale pending on Breaktop and 22 short
#4
I sent you my phone number
#5
I have three NAA pistols for sale
Breaktop #184  $1500.00
Sidewinder with long rifle conversion cylinder  $ 375.00
a 22 short made in Newbury Park Ca  $ 200
or will sell all three for $2000.00
prefer north Alabama sale
#6
I have the LCP, s&w bodyguard and the kahr cw 380. I have also owned a kel tec 32 and a 380 along with a Naa guardian.  I also have seven Naa 22 mag. I like pocket pistols.  Right now my favorite 380 is the kahr. I have six hundred rounds through it and no problems. It is the most accurate of all of them. The bodyguard has way to long of a trigger pull and I just don't like it. The LCP has always been reliable and I like it but still I carry the kahr and either a sidewinder or pug in my front left pocket.
#7
NAA Products / Re: Ammo carrier
July-23-13 17:07
one that I use and have in my truck now is a 35mm film canister. I know they are getting harder to find but they hold quite a few rounds.
#8
Sounds nice, how about a photo with the holster grip. I have the oversized rubber grip like comes on the bw on all of mine. I tried lots of other grips except the holster one and selleted on the over sized rubber as the best for me. When I walk the property or am mowing I load whichever I have iwb with snake shot. These are the best little revolvers period. Hope you enjoy yours.
#9
I carry two almost always but for me the fastest reload is the breaktop. Sure hate they discontinued it. My second carry is the sidewinder but it's not easy or far to reload. Shells catch on the grip so you have to spin the cylinder and sometimes it's hard to push the ejector. Still it's better than taking the cylinder out.
#10
NAA Products / Re: Crossdraw Holster
July-17-13 06:07
Now that's a good looking holster. Does it clip on the belt or do you have to thread the belt through it.
#11
NAA Products / Re: ammo pouch
July-17-13 06:07
I think it works very well. I am usually close to them but none have escaped. I now have a judge I carry when kayaking but for every day the NAA mini is always with me. Now I always have shot shells in the new ammo pouch.
#12
NAA Products / Re: ammo pouch
July-14-13 09:07
His web site.
Www.rkbaholsters.com
#13
NAA Products / Re: ammo pouch
July-14-13 09:07
Sure. Just go to his web site and send an email telling him what you want. He is very easy to work with. I had him make me a custom iwb holster and I really love it.
#14
NAA Products / ammo pouch
July-14-13 05:07
I wanted a way to carry lead and shot shells so I asked Stephen at RKBA holsters to make me a pouch. Just thought you guys might like to see photos of it. I live in the country with hay fields on three sides of me. When they bale the hay it causes snakes to roam and if they show up in my yard the shot shells take care of them. I know there are good snakes and bad but to my wife they are all bad. So I just shoot them and sort them out latter. At any rate with this pouch I can always have extra shot and lead with me.
#15
I just tried it with my sidewinder and it recocks from any position. Not sure why it wouldn't
#16
NAA Products / Re: Breaktop
June-29-13 05:06
I have number 184 and carry it every day. Sometimes I think I should put it in the safe but my son said when he gets it he would rather know it was one I carried and used. I am not good at collecting just to put in the safe.  I sure do like this gun and hate they cancelled making them . I carry two  minis most of the time and would choose two breaktops but no way will I pay what another breaktop would cost.
#17
NAA Products / Re: Serial number
June-25-13 06:06
Quote from: Dinadan on June-23-13 15:06
Quote from: wd345 on June-23-13 14:06
one way to know the year by the serial number is to order a custom number and include the year. Of coarse it makes it impossible to ever trade it off. My wife bought me my first mini in the early 1980's and I have bought and sold them ever since. So far most of the ones I still have are ones she bought me. I don't want her to catch me trading off a present, she might stop giving them.
Now that is what I call a present worth getting! What a wife! What a gun!

Thanks Dinadan, she has been my best friend for over 45 years. She gave me the breaktop among others, total surprise, that's why I might as well carry it because I'll never get rid of it.
#18
I have to say my favorite is the Breaktop hands down. The only quick reloading I do is if I see a snake and the breaktop is the fastest. Having said that I also carry a Sidewinder. Its not as handsome as the breaktop or Pug but works quite well. I carry two Naa's and as soon as the sidewinder's are easier to get I will carry two of them and probably put the breaktop in the safe. I love all my Naa's and look forward to anything new they come out with.
#19
NAA Products / Re: Serial number
June-23-13 14:06
one way to know the year by the serial number is to order a custom number and include the year. Of coarse it makes it impossible to ever trade it off. My wife bought me my first mini in the early 1980's and I have bought and sold them ever since. So far most of the ones I still have are ones she bought me. I don't want her to catch me trading off a present, she might stop giving them.
#20
NAA Products / new leather for NAA's
June-23-13 06:06
I just received my newest IWB holster for my NAA's. I started with the standard holster offered by Stephen at RKBA holsters. It worked but I didn't like the fact that the pistol grip touched me. It was just not comfortable.  I sent him an email and asked if he could extend the leather. He did and the second holster worked fine. I ordered it for a 22 mag 1.58 inch and it fit like a glove. However my Sidewinder would not fit. I ordered another one to fit the Pug and with that holster I can carry my Pug, Sidewinder and Breaktop. So as of now I carry the Breaktop on my right side IWB and the Sidewinder in a pocket holster on the left. I am very happy with these holsters and just thought I would share this with you. He is making me an ammo pouch and I will post photos when I get it.
#21
They are a little bit smaller than the mag but still close in size
#22
received it and replied.  the 22 mag grips are yours. thanks
#23
I have two sets of rosewood grips, one for mag and one for long rifle. $20 each or both for $35 shipped
#24
Thanks Dinadan, those are my favorite two I carry most all the time.
#25
NAA Products / Re: naa iwb holster
June-12-13 12:06
Randy63, I can tell you I have been wearing this one for a week now and it is very comfortable. I have the weight thing to and just have not found any other holster that I like till now.
#26
here is the Pug and Sidewinder comparison for you. Either carries well
#27
I now have more holsters than mini's. I have them for every occasion. for instance I like one with a leather back to conceal the outline of the gun when I have to wear dress pants. One made by rkbaholsters has a removable panel so it works in front pocket or back.
#28
NAA Products / Re: naa iwb holster
June-11-13 05:06
my favorite is the RKBA iwb holster. I found that his holsters made for the Pug also fit the Sidewinder. He is making me a iwb now for my Sidewinder. I have been carrying a mini iwb on the right side and my sidewinder in a pocket holster in the left pocket. Works for me. I had him make a modification on his holster to extend the leather to cover the grip on the mini so that it doesn't touch me. Works very well. if you want to look his web site is
www.rkbaholsters.com 
#29
here is my favorite. RKBA holsters
#30
I am also on list for one and have three local gunships looking but I managed to find one myself.  Right now am very busy but I intend to go to the range Monday. Wll post photos then. As for now I left the grips that came on it on. My breaktop has the black widow grips.
#31
Found a conversion sidewinder at a gun shop 65 miles from me but brought it home. Haven't had time to shoot yet but it's a nice addition to my always carry breaktop. The store had at least one more not the conversion model though.  It is in muscle shoals Alabama if anyone is looking.
#32
NAA Products / Re: Sidewinder
April-02-13 05:04
I just want one of the ones offered now. Any idea where to find one
#33
not long ago someone posted a gun dealer that had sidewinders in stock. Anyone remember.. I am looking for one, along with lots of others.
#34
I found my parts list for the breaktop and yes there is a roller above the cylinder. The pin that holds it is gone. Must have come out while I was shooting the gun Friday. Glad the roller didn't come out till I was cleaning otherwise I might never have noticed. I hope to hear from someone at NAA and hope they still have parts for this. Not sure what effect the roller has but I don't think I will shoot till its fixed.
#35
I did send an email along with the photo but I am sure they won't be opened till Monday and who knows how long it will take for a response